6
6.5 Serial Commands
COMMAND
Description and Parameters
?
Show the full command list.
help
Show the full command list.
set factory default
Reset the unit to the factory defaults.
get command ver
Show the unit’s current command version.
get fw ver
Show the unit’s current firmware version.
get model name
Show the unit’s model name.
get model type
Show the unit’s product type.
set out A route N1
Route the specified input to the HDMI output.
N1
= 1~3
[HDMI input number]
get out A route
Show which input is currently routed to the HDMI output.
set out auto mode N1
Set the auto switching/scanning behavior of the unit.
Available values for
N1
:
0
[Off]
1
[Auto
switch]
