VGA to DVI-I
Scaler Box
Operation Manual
CP-252
4.Configuration & Operation
4.2 Menu and Adjustments
Output set up-When it is selected, a sub-mnu as below appears.
DVI-A DVI-D
Mode
XXXX-XX
Select DVI-A when you would like to use analog output of CP-252.
Select DVI-D when you would like to use digital output of CP-252.
When DVI-A is selected, it give you choice for the output mode as follow:
Output modes under DVI-A.
70/75 Hz
-RGB
-RGB
-RGB
-RGB
-YPbPr
-YPbPr
-YPbPr
-YPbPr
70/75 Hz
-RGB
-RGB
-RGB
-RGB
When DVI-D is selected, it gives you choices for the output mode as follows:
Output modes under DVI-D.
Picture Adjust-When it is selected the following adjust parameters will appear:
Contrast
Bright
Color
Red
Green
Blue
Reset
Exit
6
070
130
070
128
128
128
Use +,- to choose your desired PC or HDTV resolution.
HDTV (RGBHV)
HDTV (RGBHV)
3. Installation
B. For analog RGB(VGA) output, (Select DVI-A in the Output
setup of the menu).
(b) HDTV in to PC or HDTV out
DVD, STB,DVHS
CP-252
Analog
HDTV output
HDTV in
(a) PC in to PC or HDTV out
VGA
cable
CP-252
Analog HDTV output
VGA to YPbPr cable
VGA to YPbPr Cable
VGA cable
Analog PC output
PC
PC in
YPbPr/YCbCr
to VGA cable
DVI to
VGA
Adaptor
VGA cable
Analog
PC output
DVI to
VGA
Adaptor
4
3.3 Connection Block Diagram:
4.Configuration & Operation
4.1 Front and Rear Panels
4.2 Menu and Adjustments
PC/HD INPUT
DC 5V 2A
Pressing the Menu button will bring up the OSD menu controls on the
screen as follows:
* Input set up
* Picture Adjust
* HV Adjust
* OSD Adjust
* System Information
* Auto Adjust
* Exit
Use +,- to move the arrow cursor to your desired selection, then press MENU to
confirm your selection and enter into sub menu.
Input set up - When it is selected, a sub menu as below will appear.
Clock
Phase
32/64
22/31
The CP-252 will automatically detect and show the input signal format as
YPbPr or RGB.
You can also manually select the YPbPr or RGB to match the format of your input.
Selecting a format that doesn't coincide with your input will result in an abnormal
picture.
5
Clock: To adjust for the most optimal input clock frequency where picture is
stable and unskewed.
Press + button also narrow the width of the picture toward the left.
Press - button to extend the width of the picture toward the right.
Phase: Use +,- to adjust for lowest snow noise of the picture.
YPbPr RGB
Use +,- to choose the parameter your want to adjust and then press the
Menu(Enter)to highlight your selection. Once a parameter is highlighted,
use +,- to increase or decrease the setting value.
Press Menu(Enter) again to leave the setting. Move the arrow to exit then
press Menu/Enter to Exit.
XGA
480p
DVI OUTPUT
MENU -
+
Spec.
Signal Type
Input
Output
Input
Output
CP-251
Analog
Analog
Analog
Analog
Analog
Digital/Analog
Analog
Digital/Analog
Digital
Digital/Analog
Digital
Analog
Connector
HD-15F
HD-15F
HD-15F
DVI-I
DVI-D
HD-15F
DVI-D
RCA/4Din/7Din
DVI-I
HD-15F
RCA/4Din/7Din
DVI-I
Model
Format
Input
Output
PC-RGB+HDTV-RGB/YPbPr(Auto/Manual)
PC-RGB+HDTV-RGB/YPbPr(Manual)
PC-RGB+HDTV-RGB/YPbPr(Auto/Manual)
PC-RGB+HDTV-RGB/YPbPr
Digital:PC-RGB+HDTV-RGB Analog: PC-RGB+HDTV-RGB/YPbPr
PC-RGB+HDTV-RGB/YPbPr
PC-RGB+HDTV-RGB+YPbPr(Manual)
Digital:PC-RGB+HDTV-RGB Analog: PC-RGB+HDTV-RGB/YPbPr
Digital:PC-RGB+HDTV-RGB Analog: PC-RGB+HDTV-RGB/YPbPr
CVBS/S-Video/TUV/RGsB(Manual)
CVBS/S-Video/TUV/RGsB(Manual)
Analog: PC-RGB+HDTV-RGB/YPbPr
Cypress's high performance scaler/processor family
CM-348
CM-347
CP-254
CP-253
CP-252
Note:
4 Din:4-pin mini Din
7 Din: 7-pin mini Din
RGsB: RGB Sync on Green
