9
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter's Front Panel
POWER
GbE VIDEO TX
LINK
RX
USB
VIDEO SWITCH
SDV-FTX
1
2 3 4 5 6 7 8
1
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
2
GbE LED:
This LED illuminates and blinks to indicate activity on the
gigabit Ethernet port.
3
VIDEO LED:
This LED will illuminate when the currently selected input
is live. When no source is detected the LED will remain off.
4
LINK LEDs:
These LEDs illuminate to indicate the fiber network
connection’s status.
TX:
This LED blinks to indicate data transmission activity.
RX:
This LED blinks to indicate data reception activity.
5
USB LED:
This LED will illuminate when the USB port is actively paired
with a Receiver’s USB port.
6
BLANK BUTTON:
Currently no assigned function.
7
VIDEO SWITCH BUTTON:
Press this button to switch between the
HDMI and DisplayPort inputs.
Note: Press and hold the Video Switch button for 30 seconds when
powering the unit on to reset the unit to the factory defaults.
8
RESET:
Press and hold this button for 3 seconds to soft-reboot the
unit.
