3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
LOCK
MENU
OUT
A
1
B
2
C
3
D
4
IN
E
5
F
6
G
7
H
8
CMSI-8H8CVL 8 x 8 HDMI HDBaseT Matrix
2
3
4
5
6
1
1
LCM:
Displays the setting information of each input and output
setting.
2
POWER:
Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3
LOCK:
Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate when locked.
4
IR:
IR Receiver window (accepts the remote control signal of this
device only).
5
MENU:
Press this button to access the LCM menu system, from here
EDID settings can be managed and IP system settings can be
displayed.
6
IN/OUT and 1~8/A~H:
Press the OUT button and then the number
buttons to select the required output ports, and press IN button
and then a single number button to select the required input
source, finally press the MENU button to confirm the selection.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2, then the following sequence of
button presses need to be performed:
Press: OUT
A
B
C
D
IN
1
MENU,
and then press: OUT
E
F
G
H
IN
2
MENU.
Note: If the MENU button is not pressed the selection will not be
changed.
