CYP CLUX-18W, Operation Manual

Page: 7 / 13

3
①
④
6. Installation
Front Panel
⑤
①
. HDMI OUTPUT 1~8:
Connect your LCD TV or HD monitor with
EHDMI cables.
②
. EDID selection:
STD/TV – By switching to STD user can
select both deep color and audio
channels function, if switching to TV the
unit will read TV’s EDID and send the
image from source accordingly.
Note: When in STD mode the deep color
is suggest switching to 8 bit for longer
distant display.
2CH/Multi CH – Support 2 channels or
Multi audio channels audio function.
This selection is only available when EDID
is in STD mode.
Note: When Multi CH is selected TV/
display must also support Multi CH
function otherwise, TV/display will have
no audio output unless, HDMI output
②
connect to AVR and then to TV/display.
8/12 bit – Support 8 or 12 bit’s deep color
function. This selection is only available
when EDID is in STD mode.
③
Note: When HDMI output has both 8 bit
and 12 bit displays, to ensure all output
will display, switch to 8 bit is imply with
the first HDMI output of 8 bit’s displayer.
On the other hand, when all output are
with the same bit’s displayer of 12 bit or
8 bit then switch the function to 12 bit or
8 bit will be proper. The splitter will not
function according to different bits’ of
display on HDMI outputs simultaneously.
③
. Sys. Reset: System reset function.
It is suggest having this function switch
OFF always except when doing system
reset. By switching to ON the system will
reset HDMI output to HDMI 1 within 8~10
minutes, switching to OFF means CEC
bypass.
Note: The system reset function only
functioning when the displayer is build
with CEC function.
④
. Power & LED: Power switch On/Off Red
LED illuminate when power is on.
⑤
. HDMI INPUT: Connect your source