Operation Manual
CHDMI-4M
1 x 4 HDMI
V1.2 Splitter
with CEC and
multi-channels
Introduction
This is a high performance 1 to 4 HDMI with multi-channels distribution amplifier.
It allows one HDMI source to connect up to 4 HDMI displays with multi-channels
output simutaneously.
Features
Operation Controls and Functions
Front Panel
1. HDMI output 1: Connects to the HDMI input of your first display.
2. HDMI input: Connects to the HDMI or DVI output of your source equipment such
as DVD player or Set-Top-Box.
3. Sync Led: The LED will illuminate when the HDMI source signal is connected
to the input and is detected by the unit.
4. Power input: Plug the supplied 5VDC power supply into the unit.
The LED will illuminate when connected.
Rear Panel
1. HDMI output 2/3/4: Connects each of these output ports to the HDMI input
of a HDMI display.
1
4
2
3
DC 5V
Power
SYNC
OUTPUT
CHDMI-4M HDMI SPLITTER
1
HDMI
HDMI
INPUT
1
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
3
2
4
1. Built-in EDID simulator and HDCP keyset allows each output to work
independently in connecting to a HDMI display.
2. Splits a HDMI source up to 4 outputs without loss.
3. Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
4 Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480p to 1080p.
6. Each of the buffered output can run up to 25 meters @1080p.
7. Supports multi-channls output from each independent HDMI ports.
