4
6.2 Rear Panel
DC 24V
CAT5e/6 IN
POWER
MODE
LINK
1
2
4
5
3
1
MODE LED
The yellow LED will flash when the unit is powered or when an
active transmitter is connected.
2
CAT5e/6 IN
Connect to the transmitter unit with a single CAT5e/6/7 cable (up
to 100m).
3
LINK LED
The green LED will illuminate when output is connected to an
active transmitter. The LED will flash if there is a problem with the
connection.
4
POWER
The LED will illuminate blue when the unit is powered by a power
supply or a PoE transmitter.
5
DC 24V
Connect the 24V DC power adaptor included in the package to
the unit and plug it into an AC outlet.
Note: This device can be powered without the power adaptor
when a PoE (Power over Ethernet) enabled active transmitter
connected to the 'CAT5e/6 IN' port.However, in a cascading
scenario when multiple repeaters are in connection, only one
single repeater can be powered by PoE while the others require
their own power supply connection.
