CYP CH-V502TR, Operation Manual, Page: 9 / 32

4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER T/R SOURCE GbE VIDEO TX RX USB
LINK
INFO
MENU ENTER
–
+
1 2 3 4 5 6 7 8 9
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2
T/R LED: This LED indicates if the unit is in Transmitter (Green LED) or
Receiver (Amber LED) mode.
3
SOURCE LED: This LED will illuminate when the local HDMI input is
live and selected.
4
USB 2.0 (Type A) Ports: Connect directly to standard USB devices
such as a mouse, keyboard or flash drive to extend their USB
functionality to the currently active/routed USB Device Mode
transceiver.
5 STATUS LED BLOCK
A
GbE LED: This LED will illuminate and blink to indicate a live and
active connection on the gigabit Ethernet port.
B
VIDEO LED: This LED will illuminate when a video signal is live on
the 10GbE streaming port. When no video is active the LED will
remain off, even if the streaming connection is valid.
C
TX & RX LINK LEDs: These LEDs will illuminate and blink to
indicate data transmission and reception activity across the
10GbE streaming connection.
D
USB LED: This LED will illuminate when the unit’s USB ports have
successfully paired with the USB ports on another unit. This LED
will blink if the unit’s USB ports are not currently paired and in
stand-by mode.
6 MENU BUTTON: Press to enter the OSD menu, or to back out from
menu items.
7
− (MINUS) BUTTON: Press to move up or adjust selections within
OSD menus. When not in a menu, press to manually toggle
between inputs (Receiver Mode only).