5
6.2 Receiver Front and Rear Panels
RS-232 Out
LAN
HDMI Out
CAT5e/6 to HDMI with LAN/IR/RS232
Receiver
Rear
Front
CAT5e/6 In
Link
IR1 Extender
IR2 Blaster
Power
2
3
1
6
5
7
8
4
1
HDMI Out
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.
2
LAN
Connect to a PC or Laptop to the Internet or network connection.
3
RS-232 Out
Connect to the device that is to be controlled (via D-Sub 9 pin
female cable) by RS-232 commands.
4
Power LED
This blue LED will illuminate when the device is connected to a
power supply.
5
IR 2 Blaster
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be
controlled.
6
IR 1 Extender
Connect to the supplied IR receiver cables for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
7
Link LED
The yellow LED will illuminate when both the input and output
signals are connected.
8
CAT5e/6 In
Connect to the transmitter unit with a Single CAT5e/6 cable for
tranmission of all data signals.
