CYP CH-506TXPLRXPL, Operation Manual, Page: 8 / 16

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Power
Link
CAT 5e /6 Out
DC 24V
1 4 5 6 7 8 2 3
IR2 Extender
RS-232 In IR1 Blaster
HDMI In
Transmitter
1
DC 24V
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet.
2
Power LED
3 LINK LED
This LED will illuminate in blue when the devices are connected
with a CAT5e/6 cable. When the data transmission accrue with
error the LED will be blinking.
4
CAT5e/6 OUT
Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals.
5
RS232 IN
Plug the 3.5Ø to D-Sub 9 pin female cable included in the
package and connect to a PC or laptop for RS-232 commands
transmission.
6
IR2 Extender
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
7 IR1 Blaster
Plug the IR blaster included in the package for IR signal sending
from the receiver side.
8 HDMI IN
Connect with source equipment such as DVD/Blu-ray player.