CYP CH-2606TX, Operation Manual, Page: 6 / 24

1
1. INTRODUCTION
This HDBaseT 2.0 Transmitter is a great solution for extending
uncompressed HD audio and video as well as Ethernet and control via
a single run of Cat.5e/6/7 cable over distances of up to 100 meters.
Multiple data and control signal types are supported, including USB 2.0,
IR, RS-232 and LAN connections. An independent analog stereo audio
input is also provided to enable easy audio signal extension. The HDMI
input supports transmitting resolutions up to a maximum of 4K@30Hz
(4:4:4, 8-bit) or 4K@60Hz (4:2:0, 8-bit) over HDBaseT to a compatible
Receiver.
When paired with this unit’s standard Receiver, 2 switchable USB 2.0
host (Type B) connections are available (1 on the Transmitter, 1 on the
Receiver) which can connect to devices on up to 6 USB 2.0 (Type A)
ports (3 on the Transmitter, 3 on the Receiver) forming a highly flexible
KVM extension configuration (Note: Only 1 USB host may be active at
a time).
This Transmitter (PD) may be powered locally using a standard power
supply, or it can be powered by PoH (Power over HDBaseT) provided
by a compatible Receiver (PSE), allowing for greater flexibility within
different installation scenarios. This unit is controllable via a front panel
button and RS-232.
2. APPLICATIONS
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1× HDMI/USB to HDBaseT Transmitter
• 1× 3.5mm to IR Blaster Cable
•
1x 3.5mm to IR Extender cable
• 1× Shockproof Feet (Set of 4)
•
1× Operation Manual