DRAFT
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR OUT
HDMI IN
DC 5V
SERVICE
CAT6 OUT
1
2
3
4
5
1
IR OUT:
Connect the IR Blaster cable included in the package for
IR signal transmission. Pace the IR blaster in direct line-of-sight of
the equipment to be controlled.
2
HDMI IN:
This slot is where you connect the HDMI or DVI output port
of your source equipment such as DVD/Blu-ray players or Set-Top-
Box with an HDMI cable or link up with another receiver unit from
the same family type to extend a signal over long distance.
3
DC 5V:
Connect from 5V DC power supply into the unit and
connect the adaptor to an AC outlet.
4
SERVICE:
This slot is reserved for factory use only.
5
CAT6 OUT:
Connect the CAT6 output of the Transmitter with the
CAT6 input of the Receiver with CAT6 cable.
Note:
A. Cable tested with CAT6/23AWG/Solid, using cables of another
types may result in different operating distance.
B. Equipment used in cable distance testing included: PS3 120G, 37”
Philips 8 bit LCD TV and 37” Samsung 12 bit LCD TV.
C. Figures provided in this manual are for reference only, actual
performance may depend on the source and display used along
with the type of cable.