7.2 Rear Panel
CH-1107TX
②
①
TV/STD
10 Bit
CAT6 OUT
EDID
8 Bit
12 Bit
①
EDID Control Switcher: Switch the EDID between STD and TV. Switch to
STD to use the built-in EDID or switch to TV to use the TV’s EDID. The default
factory setting is TV, leave as is when the display is working properly.
Note: 1. When EDID is switched to STD the unit will use its built-in EDID which
supports:
Video → 1080p 8-bit, 10-bit or 12-bit (max)
Audio → PCM 2CH
2. The EDID selection will only be activated when the unit is re-plugged
and powered on.
②
CAT6 OUT: Connect the CAT6 output of the transmitter with the CAT6
input of the HDMI over single CAT6 receiver.
Note: A. This
system was tested with CAT6/23AWG/UTP/568B cables,
so if using cables of another type, results may vary.
B. Cab
le distance tested with PS3 120G & 40" Samsung LED 12 bit LCD
TV.
C.T
he figures provided in this manual are for reference only; actual
performance may depend on the source and display used along
with the type cable.
5