CYP CDPS-4KQ-AD, Operation Manual

Page: 26 / 36

21
COMMAND
Description and Parameters
set video wall h bezel compensation N1

Set the video wall’s horizontal bezel compensation value.
N1 = 0~50 [Horizontal bezel compensation value]
get video wall h bezel compensation

Show the video wall’s current horizontal bezel compensation
value.
set video wall bezel mode N1

Enable or disable bezel compensation mode for the video wall.
Available values for N1 :
OFF [Disabled]
ON [Enabled]
get video wall bezel mode

Show the current state of the video wall's bezel compensation
mode.
set video wall unit index N1

Set the unit’s video wall index number.
N1 = 0~15 [Video wall index number]
get video wall unit index

Show the unit’s current video wall index number.
set user 1 edid data

Initiate uploading a new User EDID to the unit via the USB port.
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.