21
6.7 Telnet Control
Before attempting to use the telnet control, please ensure that both
the Scaler (via the ‘CONTROL’ port) and the PC/Laptop are connected
to the active networks.
To access the telnet control in Windows 7, click on the ‘Start’ menu
and type "cmd" in the Search field then press enter.
Under Windows XP go to the ‘Start’ menu and click on 'Run', type
"cmd" with then press enter.
Under Mac OS X, go to Go→Applications→Utilities→Terminal.
See below for reference.
Once in the command line interface (CLI) type "TELNET", then the IP
address of the unit and hit enter.
Note: The IP address of the unit can be found under 'Ethernet Setup'
on the unit’s OSD menu.
