11
COMMAND
DESCRIPTION AND PARAMETERS
Audio Commands
SET AUDIO OUT A VOLUME N1
Set the audio output volume.
N1 = 0 ~ 100
[dB Units]
Volume Mapping Table:
100
[+20dB]
80 [0dB]
60 [-20dB]
40 [-4dB]
20 [-60dB]
0 [-80dB]
SET AUDIO OUT A VOLUME UP
Increase the audio output volume by 1 step
(up to a max of 100).
SET AUDIO OUT A VOLUME DOWN
Decrease the audio output volume by 1
step (down to a min of 0).
GET AUDIO OUT A VOLUME
Show the current audio output volume.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
