CynkoMet T-149, Instructions For Use And Operation

Page: 51 / 148

Cynko Met
T-149
51
Connecting the second trailer

Tractor with the attached trailer first is to be set directly in
front of the drawbar of another trailer.

Immobilize the second trailer with a parking brake.

Remove the swivel pin in the first trailer.

Adjust the height of the drawbar of the second trailer in such a
way as to allow to couple the machines.
 Reversing the tractor, drive the rear hook of the first trailer on
the drawbar of the second trailer.

Insert and secure the hook swivel
 Connect the pneumatic, hydraulic and electric hoses

Disconnect the second trailer

Immobilize the tractor and trailer with a parking brake.
 Stop the tractor engine. Close the cab of the tractor protecting
it from unauthorized access.

Disconnect the pneumatic, hydraulic and electric hoses

Unlock the swivel hook in the first trailer. Remove the swivel
and drive the tractor away
4.3.5 Loading the crate.
CAUTION!
CAUTION!
Loading of the crate can take place only when
the trailer is connected to the tractor, set on
level ground with the drawbar directed to drive
forward and braked
You should aim for even load distribution in the loading
crate. When loading, it is recommended to use a crane, loader
or conveyor. Before loading, check that the locks, wall hinges
and the dump window in the rear wall are closed. If the trailer