CynkoMet T-104, Instructions For Use And Operation

Page: 45 / 128

Cynko Met
T-104/6
45
4.3.2 Preparation for work.
In preparation for work, the following should be checked:

the wear of the tires and driving wheels,

Air pressure in the tires,
 springs condition, and in particular the completeness of the
feathers

tightening the nuts fixing the discs of the driving wheels to wheel
hubs and the condition of other screw connections.
In addition, after combining the machine with the tractor
check:

the efficiency of the electrical system and lighting system and
trailer signaling,
 the effectiveness of the brake system,

the correct operation of the hydraulic discharge
mechanism through trial tilting of the load crate
backwards or sideways.
4.3.3 Connecting and disconnecting with the
tractor.
The trailer can be connected to the tractor, if all
connections (electrical, pneumatic, hydraulic), and a hook in the
agricultural tractor shall comply with the requirements of the
manufacturer of the trailer and the tractor.
In order to connect the trailer to the tractor, perform the
following steps:

Prior to coupling with tractor, check if the trailer is braked with the
parking brake.