CynkoMet T-104, Instructions For Use And Operation

Page: 33 / 128

Cynko Met
T-104/6
33
Figure 7. Dump window.
1 - rear wall, 2 - window dump, 3 - lever, 4 - locking screw
4.2.3 The hydraulic installation of the lift
Hydraulic tipping mechanism is designed for automated
unloading of the trailer through tilting the load crate backwards or
sideways. The hydraulic system of the dumping mechanism is
supplied with oil from the tractor's hydraulic system. To control
the lifting of the loading crate, the oil distributor of the external
hydraulic tractor is used
The hydraulic system consists of two independent circuits,
namely:
 Circuit I - used to power the telescoping cylinder that raises the
cargo box;

Circuit II - is used to power the hydraulic system of the second
trailer, in the case of a merger of two tractor trailers
simultaneously.
To turn these circuits, a three-way valve (2) is used. The lever
of this valve can occupy the following positions:
1
2
3
4