CynkoMet N-233 Series, Instructions For Use And Operation

Page: 60 / 149

Cynko Met
N-233
Page 60
6. Technical Support
When using the spreader, constant monitoring of the technical
condition and the execution of maintenance procedures is required to
keep the machine in good technical condition. Therefore, the user of the
spreader is obliged to perform all maintenance and regulatory tasks
specified by the manufacturer.
To ensure proper functioning and avoid serious failures, the spreader
must be kept in the proper technical condition and operated according
to the manufacturer's guidelines.
An important element of the operation is the daily maintenance of the
spreader (before commencing work), it foresees:

checking tightness of threaded joints (table no. 7),

checking the tightness of the hydraulic system

checking the tightness of the pneumatic system,

checking the correct operation of mechanisms (conveyor feed).

check the functioning of the brake system,

check the functioning of the electrical system,

checking and performance of lubrication, according to the instructions
(section 6.10),

checking the tire pressure (tab. 3),

checking all locks/latches (e.g. side walls), whether they are properly
closed and secured by pins, and that there is no risk of spontaneous
opening.
All detected faults are to be removed as soon as they are
detected. Use of a faulty spreader may have serious consequences.