Cynko
Met
N-200
Page 33
bystanders who may be present in the danger zone.
After completion of the machine coupling, check the security of
the hitch.
NOTE!
NOTE!
When disconnecting the spreader from the tractor, keep
particular caution.
The engine of the vehicle drawing the mini-spreader must be
turned off and its key removed from the ignition switch.
4.3.5 Loading the cargo box.
NOTE!
NOTE!
Loading of the cargo box may be performed only when the
mini-spreader is coupled to a drawing vehicle and standing on
level ground, with the parking brake of the drawing vehicle
engaged.
You should aim for even distribution of the load in the cargo box which
has a significant impact on the uniformity of dispersion of the material found
on the spreader and its stability during driving. Prior to starting loading,
check whether the interior wall is closed and the conveyor and adapter drive
control lever is found in the disengaged position (angled lever position).
Lightweight, bulk materials may be loaded even above the cargo box,
however, up to 5 cm at the most, with particular attention to the stability of
the spreader.
Due to the varied density of the materials, the use of the total capacity of the
cargo box may result in exceeding the permissible load of the mini-spreader.
