Cynko
Met
N-200
Page 13
chocks disabling free movement of the mini-spreader have been
placed under the wheels,
the mini-spreader is decoupled from the towing vehicle,
the control lever is in the angled position (drive disengaged),
if the mini-spreader has not been decoupled from the towing vehicle,
always make sure that the keys have been removed from the ignition
switch.
After checking the above points, it is not possible to start work on the
adapter's drive.
3.5
Maintenance.
Repair, maintenance and cleaning as well as removal of malfunctions can be
performed only if the engine of the machine drawing the mini-spreader is
switched off and the key has been removed from the ignition switch.
During maintenance and repair jobs use appropriate tools and protective
clothing.
Maintenance should be performed standing on the floor outside of the
spreader's outline.
Use the spare parts according to the catalog of spare parts.
Modifications can be made only with the permission of the manufacturer. The
basic condition for safety are original spare parts and components. Using
other parts may result in exclusion of liability of the manufacturer for resulting
consequences.
Maintenance operations of the spreader should be carried out on a stable
surface and with securing the spreader against uncontrolled rolling off
(through planting of chocks under the wheels);
3.6
The principles of movement on public roads.
NOTE!
NOTE!
The machine is not designed for driving on public roads due to
the absence of lighting. Driving on public roads is strictly
prohibited. The spreader is intended for work on a farm or
property under conditions of good visibility.
