69
EN
STEP 7:
END OF PROGRAM
Cycle completed succsessfully
new
Start
After the end of the drying program, the
display will indicate that the program has
been successfully completed
Ƽ
"Cycle
completed successfully"
ƽ
.
Cycle completed succsessfully
Anti
creasing
If you have selected the "anti-crease"
option, the dryer will continue to operate
after the end of the drying cycle for the
amount of time speci
Ų
ed upon selection
of this program setting.
Cycle completed succsessfully
fav
Add
new
Start
5
6
After the drying cycle, store the program
Ƽ
see "Favourite programs"
ƽ
.
Open the door towards you and remove the laundry from the dryer.
OK
Clean door filter
6
Clean the net
Ų
lter in the door
Ƽ
see chapter "CLEANING AND
MAINTENANCE"
ƽ
.
Make sure the dryer drum is empty, then close the door.
If you do not do anything for 5 minutes after the end of the program, the display will switch o
Ű
to standby
mode in order to save power.
The display will light up again if you press the ON/OFF button or open the dryer door.
After each drying cycle, clean the net
Ų
lter in the door and empty the condensate tank. See chapter
”CLEANING AND MAINTENANCE”.
A clogged net
Ų
lter may result in activation of the automatic overheating switch-o
Ű
device. Clean the
Ų
lter, wait for the machine to cool down, and try running it again. If the dryer still fails to start, call a service
technician.
After the drying process, unplug the dryer power cord from the power outlet.