)2
3
Installation
B
Please remember that the
manufacturer shall not be held liable if
the information given in the instruction
manual is not observed.
Points to be considered
when re-transporting your
refrigerator
1.Your refrigerator must be emptied and
cleaned prior to any transportation.
2.Shelves, accessories, crisper and etc.
in your refrigerator must be fastened
securely by adhesive tape against any
jolt before repackaging.
3.Packaging must be tied with thick
tapes and strong ropes and the
rules of transportation printed on the
package must be followed.
Please do not forget…
Every recycled material is an
indispensable source for the nature
and for our national resources.
If you wish to contribute to recycling
the packaging materials, you can
get further information from the
environmental bodies or local
authorities.
Before operating your
refrigerator
Before starting to use your refrigerator
check the following:
3
.
Plug the refrigerator into the wall
outlet. When the fridge door is
open, the fridge compartment
interior light will come on.
1.
Is the interior of the refrigerator dry
and
can the air circulate freely in
the rear of it?
2.
Clean the interior of the refrigerator
as
recommended in the
“Maintenance
and cleaning”
section.
4. You will hear a noise as the
compressor starts up. The liquid
and gases sealed within the
refrigeration system may also give
rise to noise, even if the
compressor is not running and this
is quite normal.
5. Front edges of the refrigerator may
feel
warm. This is normal. These
areas are designed to be warm
to avoid condensation
Electric connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
Important:
• The connection must be in compliance
with national regulations.
• The power cable plug must be easily
accessible after installation.
• The specified voltage must be equal to
your mains voltage.
• Extension cables and multiway plugs
must not be used for connection.
B
A damaged power cable must be
replaced by a qualified electrician.
B
Product must not be operated before
it is repaired! There is danger of
electric shock!
