Cylinda IM90M, Instruction Manual, Page: 19 / 36

EN
19
the appliance unless specifically
stated in the user manual .
Children should not perform
installation operations . Keep
children away during
installation . Keep the packaging
materials (plastic bags,
polystyrene parts, etc .) out of
reach of children, during and
after the installation .
After unpacking the appliance,
make sure that it has not been
damaged during transport . In
the event of problems, contact
the dealer or your nearest After-
sales Service .
The appliance must be
disconnected from the power
supply before any installation
operation .
During installation, make sure
the appliance does not damage
the power cable .
Only activate the appliance
when the installation has been
completed .
After installation, the bottom of
the appliance must no longer be
accessible .
Carry out all cabinet cutting
works before fitting the
appliance in the furniture and
carefully remove all wood chips
and sawdust .
Do not obstruct the minimum
gap between the worktop and
the upper edge of the oven .
Only remove the oven from its
polystyrene foam base at the
time of installation .
Do not install the appliance
behind a decorative door - Risk
of fire .
After unpacking the appliance,
make sure that the appliance
door closes properly .
In the event of problems,
contact the dealer or your
nearest After-sales Service .
ELECTRICAL WARNINGS
For installation to comply with
current safety regulations, an
omnipolar switch with minimum
contact gap of 3 mm is required
and the appliance must be
earthed .
If the power cable is damaged,
replace with an identical one .
The power cable must only be
replaced by a qualified
technician in compliance with
the manufacturer instruction
and current safety regulations .
Contact an authorized service
center .
It must be possible to
disconnect the appliance from
the power supply by unplugging
it if plug is accessible, or by
means of an accessible multi-
pole switch installed upstream
of the socket in conformity with
national electrical safety
standards .
The rating plate is on the front
edge of the oven (visible when
the door is open) .
In case of replacement of power
cable, contact an authorized
service center .
If the fitted plug is not suitable
for your socket outlet, contact a
qualified technician .
The power cable must be long
enough to connect the
appliance, once fitted in its
housing, to the main power
supply . Do not pull the power
supply cable .
Do not use extension leads,
multiple sockets or adapters .
Do not operate this appliance if
it has a damaged mains cord or
plug, if it is not working
properly, or if it has been
damaged or dropped . Keep the
cord away from hot surfaces .
The electrical components must
not be accessible to the user
after installation .
Do not touch the appliance with
any wet part of the body and do
not operate it when barefoot .
CLEANING AND
MAINTENANCE
Never use steam cleaning
equipment .
WARNING:
Ensure that the
appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock .
Do not use harsh abrasive
cleaners or sharp metal scrapers
to clean the appliance door glass
since they can scratch the
surface, which may result in
shattering of the glass .
WARNING: It is hazardous for
anyone other than a competent
person to carry out any service
or repair operation that involves
the removal of a cover which
give protection against
exposure to microwave energy .
Failure to maintain the oven in a
clean condition could lead to
deterioration of the surface that
could adversely affect the life of
the appliance and possibly result
in a hazardous situation .
The oven shall be cleaned
regularly and any food deposits
removed .
Wear protective gloves for
cleaning and maintenance .
The appliance must be
disconnected from the power
supply before any maintenance
operation .
Ensure the appliance is cooled
down before carrying out any
cleaning or maintenance
operation .