49
OPERATION
Control Panel
•
Immediately after the appliance is connected to electrical mains, all displays
will light up briefly. Your induction hob is then ready for use.
•
The induction hob is equipped with electronic touch control sensor fields, which
are operated by touching with a finger for at least 1 second.
•
Touching of a sensor is accompanied by a beep to acknowledge.
No objects should be placed on the sensor fields (this could cause an er
-
ror). Touch sensor fields should be always kept clean.
Switch on the appliance
To switch on the appliance touch and hold the on/off sensor
for at least 1 se-
cond.
The hob is switched on when
symbols or "h." / "H.” (when cooking
zones are still hot) appear on all the displays.
If you do not set the desired heat setting of the cooking zone within 10
seconds of activating the hob, the appliance will turn off automatically.
Activate cooking zone and set the heat setting.
•
Turn on the hob with the
sensor.
•
Slide your finger across the
sensor to turn on the cooking zone with the
desired heat setting.
Deactivate cooking zone by doing one of the following:
•
Turn off the hob with the
sensor.
•
Touch
to activate the cooking zone and slide to the left to reduce the heat
setting ”0.”
Deactivate cooking zones
