39 / EN
Washing Machine / User’s Manual
• Sport (Sports)
Use this programme to wash your garments that are worn for a short time such as sportswear. It is suitable to
wash little amount of cotton / synthetic blended garments.
• Bomull Hygien 20° (Hygiene 20°)
Use this programme for your laundry for which you require washing at lower temperature with intensive and
long washing cycle. Use this programme for your laundry for which you require hygienic washing at lower
temperature.
• Trumrengöring (Self Clean)
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Run the
programme without any laundry in the machine. To obtain better results, put powder limescale remover for
washing machines into the detergent compartment “2”. When the programme is over, leave the loading door
ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is a
load inside and aborts the programme.
• Centrifugering/Tömning (Spin+Drain)
Use to drain the water in the machine.
4.3.4 Temperature selection
Whenever a new programme is selected, the recommended temperature for the selected programme appears
on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.
C
If the programme has not reached the heating step, you can change the temperature without switching the machine to
Pause mode.
4.3.5 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See
"Auxiliary function selection" section for explanations of these options.
Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start / Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
C
If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause
mode.