Table continued from last page
Options
Settings
For adjusting the contrast of the top display.
Contrast top dis-
play
1/2/3/4
Display settings
4
Temperature of the final rinse in the most-
recently run program. This information is
shown on the dishwasher’s display when
the machine is next switched on.
Temp in last program
On/Off
You can choose the information that is
shown on the front display.
Info in front display
1/2
Time left
2)
Status indicator
Off
1
Time left+Status
3)
Status indicator
On
2
This sound is used to confirm each button
press.
0/1/2/3
Feedback sound
5
The buzzer indicates when a dishwashing
program has ended.
0/1/2/3
Buzzer volume
6
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
0/1/2/3/4/5/TAB
Rinse aid
4)
7
Increase the rinse aid dosage:
•
If the dishes have water marks.
Decrease the rinse aid dosage:
•
If the dishes have a sticky white/blue
film.
•
If the dishes are streaked.
•
Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
When using an all-in-one detergent that
contains rinse aid, you can activate the set-
ting TAB.
Temperatures can be displayed in °C
(Celsius) or °F (Fahrenheit).
o
C/
o
F
Temperature unit
8
2)
SANI, SANI Quick: Time left+Status
3)
SANI, SANI Quick: Time left+Temperature
4)
The setting will be deactivated following the activation of automated dosage of commercial rinse
aid. Rinse aid will not then need to be refilled.
EN 70
