32/EN
Scheduling the washing time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 3-6-9 hours. Time Delay
cannot be set after the programme starts.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Time Delay selection mode is
activated. 3-hours time delay icon will
flash on the display.
EverClean Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
3 With a second press on the key,
3-hours time delay icon will disappear
and 6-hours time delay icon will start to
flash. With a third press, 6-hours time
delay icon will disappear and 9-hours
time delay icon will start to flash.
4. Press the Start/Pause key to activate
the time delay.
While the Time Delay is active the
relevant delay period and start icon will
be displayed steadily. For 0-3 hours
time delay the 3-hours time delay icon
will be displayed, for 3-6 hours time
delay the 6-hours time delay icon will
be displayed, and for 6-9 hours time
delay the 9-hours time delay icon will
be displayed.
If the door is opened while the Time
Delay is active, the countdown will be
paused and start icon will start to flash.
To exit time delay mode without
activating the Time Delay, press the
time delay key until the 3-6-9 hours
duration indicators disappear. Time
Delay mode will be cancelled and the
programme selection mode will be
activated.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
To cancel the Time Delay function
1. Press and hold Start/Pause/Cancel key
for 3 seconds. Time delay period and
start/pause icon will start to flash and
Time Delay function will be cancelled.
You can select and start a new
programme following the cancellation
of Time Delay function.
Time Delay function cannot be set after
the programme starts.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
