9
6. System Button
1)
In-Sync Info:To view the current input resolution
2)
Factory Reset Button
3)
Firmware Update Button
The steps of firmware update:
1)
Please power OFF the scaler converter device
2)
Set the Dip Switch to
ON [ ]
3)
Power ON and connect the device to PC via USB to mini-USB cable
4)
Click the FW Update button on software
5)
Click “Load File” button to select the FW file
6)
Click “Burn” button to start the FW update process
7)
Unplug Mini-USB connector from device
8)
Set the Dip Switch to
OFF [ ]
9)
Completed FW update process
7. I/O Port and Resolution Info
To display the information about the I/O Port and the applied Resolution
8. Refresh Button
To refresh the status of the converter
9. Output Quick Selection Button
Common functions for quick setting