13
Specifications
Volume control:
•
Attenuation from -100dB till zero stepless.
•
High quality stereo VR.
Headphones output
•
Dual Jack, 6.35 mm (1⁄4 inch) 3-contact stereo, supports two headphones
•
Impedance from 32 Ohms till 300 Ohms supported
•
Maximum output power of 3000mW
•
Maximum output voltage 8 Vrms into 100 Ohms, 6 Vrms into 32 Ohms.
•
Fixed gain of 14dB.
Input signal
•
Cinch or balanced XLR 3 pin, typical 2 Vrms, max 8 Vrms input voltage
•
Impedance 10 kOhm for cinch, 20 kOhm for balanced
Line output
•
Balanced and un-balanced, 100 Ohm output impedance.
•
Line output varies with the volume level
•
Output is buffered, no loss of quality when downstream equipment is turned off
Amplifier
•
Full discrete, class-A, MOSFET, output impedance 0.5 Ohm
•
Distortion better than 0.01% (20 Hz - 20 kHz, THD+N) for closed loop operation
•
Noise and hum, better than -110 dB @ 2Vrms output
•
Wima, Rubycon and Nichicon capacitors, precision low-noise thin film resistors
•
Ordering option: open loop output mode
Various
•
Environment: relative humidity 10 – 90% non-condensing, temperature limits: 10C– 40C operating,
-20C to 80C storage.
•
Net weight: 3.2 kg, gross weight: 3.9 kg
•
Dimensions: 280 x 60 x 280 mm (excluding protrusions). Same footprint as Cyenne Audio DAC’s.
•
Power supply: maximum 25 VA, available in 115 VAC and 230 VAC models. All model 50/60 Hz.
•
Power cord, user’s manual included
