Revision A.5
Cyclops Storm OSD tpalshadow English Translation
6
SYSTEM CONFIGURATION
Use the above diagrams and notes to properly connect the STORM OSD and GPS module.
Switch on the power. The red light on the STORM OSD main board will flash. On your
attached display device you will see the following boot interface:
NOTE:
If the STORM OSD main-board is not placed level when powered on, there will be a
small plane icon flashing on the screen and the STORM OSD will not enter the operating
mode. The plane icon is visible in the screenshot above.
To enter the main menu of the STORM OSD press the ‘UP’ and ‘DOWN’ buttons on the
key pad at the same time. Use the ‘UP’ and ‘DOWN’ buttons to move the cursor. The
‘OK’ button should be used to confirm various options.
