ENGINE IMMOBILISATION
Engine immobilisation is usually provided by the vehicle's original equipment system. The P455
does provide another two independent circuits of immobilisation, however they are only
connected at special request.
GLASS BREAKAGE PROTECTION
The P455 is equipped with a sophisticated glass breakage detection unit. The system will only
respond to the breaking of any glass in the vehicle. To test the unit simply wind up all the windows
and arm the P455. Wait 30 seconds before tapping the driver's side window with a metal object
such as a coin. The siren and indicators will sound and flash. You should notice that there should
be no trigger, regardless of how hard you hit the window or body of the vehicle with your hand.
This eliminates all false alarms.
OPTIONS
The PARALYSER 455 has a number of options that can be set or reset by means of the ignition
switch. To change these options you need to do the following:
!
Open the bonnet and driver's door.
!
Turn the ignition switch from ACC position to the ON position the required number of times.
Leave the switch in the ON position when the required number is reached.
!
The vehicle indicators will flash approximately two seconds after last turn. Three flashes shows
that the option is set and one flash shows it has been reset.
