OVERRIDE
The system can be overridden by means of a Personal Identification Number (PIN).
Every unit is supplied with its own PIN. It is important to make a note of this PIN or
keep the card supplied with the unit in a safe p1ace as it also has the PIN detailed on it.
** Any digit marked '0', indicates 10 flashes.
OVERRIDE PROCEDURE
!
Insert the ignition key into the ignition switch and turn to the ON position. The red
status LED mounted on the dash will glow constantly.
!
Turn the ignition key back to the ACC position, the status LED will begin to flash
slowly. Count the number of flashes for the first digit in the PIN of the P165.
Return the key to the ON position when the correct number is reached.
!
Repeat step 2 for the remaining digits in the PIN. When all four digits are entered, the
status LED will extinguish. The P165 will then disarm.
NB: If the engine is not started with 30-40 seconds of over-riding, the P165 will again
immobilise the engine.
