-2-
OPTION SETTINgS
Passive Arm / Transmitter Code-Learning / Passive Lock / Ignition
Lock &Unlock / Set Override PIN.
. Disarm the alarm by pressing the UNLOCK/DISARM button.
2. Open the driver’s door and leave door open.
3. Turn ignition switch On the number of times corresponding to
the feature you wish to alter. Refer to the Option Table for option
selection number.
4. When the correct count is reached, leave ignition switch ON.
5. Vehicle indicators will flash when alarm is ready to change option.
6. Press the LOCK/ARM button on a valid remote control.
7. Alarm will flash vehicle indicators to confirm change, see option
table for one/three flash meaning.
OPTION SETTINgS
Passive Arm / Transmitter Code-Learning / Passive Lock / Ignition
Lock &Unlock / Set Override PIN.
. Disarm the alarm by pressing the UNLOCK/DISARM button.
2. Open the driver’s door and leave door open.
3. Turn ignition switch On the number of times corresponding to
the feature you wish to alter. Refer to the Option Table for option
selection number.
4. When the correct count is reached, leave ignition switch ON.
5. Vehicle indicators will flash when alarm is ready to change option.
6. Press the LOCK/ARM button on a valid remote control.
7. Alarm will flash vehicle indicators to confirm change, see option
table for one/three flash meaning.
*** Warning this function can result in keys being locked in
vehicle!!
Ignition
Switches
Feature
One Flash
Three
Flashes
3
Anti-Hijack
Disabled
Enabled
5
Passive arming
Disabled
Enabled
7
Program new remote Press new remote control
3
Chirps for ARM /
DISARM
Disable
Enable
5
Passive Locking
Disabled
Enabled
9
Set new PIN
Begin changing PIN
EMERgENCY PIN OVERRIDE
In the event a remote is lost, stolen or broken, the 66-3 alarm
system may be overridden by using the programmed two digit
Personal Identification Number (PIN).
. Insert ignition key into vehicle ignition switch.
2. Turn key to the ON position (the position just before engine
crank). The red status LED will glow constantly.
3. Return the key to the ACC position (the first position that powers
your radio).
4. The status LED will begin flashing slowly. Count the flashes.
5. When the flashes match the first number in your PIN, turn the
ignition switch to the ON position again.
6. Repeat step #5 for the second digit of the PIN.
7. The status LED will extinguish and the 66-3 will now be
disarmed and engine will start.
PROgRAMMINg NEW PIN
. Disarm the alarm by pressing the UNLOCK/DISARM button.
2. Open the driver’s door and leave door open.
3. Switch ignition switch Off and On 9 times.
4. When the 9th count is reached, leave ignition switch ON.
5. Vehicle indicators will flash when alarm is ready accept new
remote PIN.
6. Press the LOCK/ARM button the number of times corresponding
to the first digit of the new PIN. Press UNLOCK/DISARM the
number of times corresponding to the second digit of the new PIN.
This step is critical, the timing between pressing the LOCK/ARM
button and pressing UNLOCK/DISARM must be as short as
possible. Any unprovoked indicator flash before the UNLOCK/
DISARM button is pressed means the PIN programming procedure
has dropped out - start again!!!
7. Alarm will flash vehicle indicators three times to confirm
successful programming.
*** All central locking and boot release features require additional
hardware, which is not supplied with the 66-3 alarm system.
Vehicles with central locking and/or electronic boot release will still
require connections to the 66-3 which are not a part of a standard
installation.
Control Module
Siren and Remotes
CYCL PS
VEHICLE SOLUTIONS
