smartlink guide issue 10 EN
Changing the CR2032 battery
FAILURE TO MAINTAIN THE BATTERY COVER SEAL WILL
RESULT IN WATER INGRESS & PERMANENT DAMAGE NOT
COVERED UNDER WARRANTY.
Cyclops recommends Renata batteries for maximum
battery life and performance.
The sensor will show 0.00 as the load (even when under
load) when the batteries need to be replaced.
Cyclops recommends removal of the battery from the
device and storage of the sensor in a cool, dry place away
from direct sunlight during extended periods of time where
it is not expected to be used.
Please dispose of used batteries responsibly.
Removing battery & cover
Use a coin that fills the battery cover slot and twist the coin
until the battery cover pops out and comes completely free.
If necessary, free the battery with a gentle tap to the
opposite face of the sensor.
Replace the CR2032 battery with equivalent. Do not use
non-standard batteries or other sizes, as this can cause
damage.
Replacing battery & cover
To reinstall the battery & cover, install bve side up,
insert cover, line up the arrow on the cover with the
diagonal dash on the housing. Press firmly so the cover is
flush with the housing. Use a coin to twist the cover until
the arrows in the cover are aligned, and the battery cover is
flush with the housing.
Technical Data
Model
MWL
tonnes
Dimensions
mm
Mass
g
Accuracy
range*
kg
nano
0.6
64x55x17
80
±6
2t
2
79x55x19
160
±20
5t
5
83x66x22
210
±50
10t
10
93x74x25
360
±100
20t
20
107x88x39
770
±200
*Accuracy range achieved using Cyclops Marine supplied
strops.
Frequency
1Hz (custom available on request)
Accuracy
±1% of MWL within 0-40ºC
Body Material
Al6082-T6 (600kg), Ti6Al4V (2, 5, 10, 20
tonne)
Housing Material Acetal, IP67 rated
Battery
life 200 hours, 1x CR2032
smart
link
s are not warranted to be accurate for the
purposes of buying/selling products by weight
Displaying Load Data
For both seeing live loads and logging load data from a
sailing session, either a mobile phone or a Cyclops Marine
Gateway should be used. Scan the applicable QR code
below for instructions.
Mobile app instruction:
Cyclops Gateway installation guide:
.
