Components
TOP PANEL
DOOR
Many of the items found in this Installation Instruction are common to the ProPark Series
Starter and Adder Lockers. Some items may be reduced or deleted depending on options.
END PANEL
NOTE - The hardware will
be included in separate
sealed bags
QUICK STEPS:
1. Lay out the Parts
2. Pre Assemble Blocks
3. Attach Riser Blocks to
Lower-Tier
4. Prepare Doors
5. Assemble End Panels
6. Assemble Frames
7. Fit Top Panels
8. Hang Doors & Adjust
DOUBLE TIER
STARTER
[4-DOOR]
DOUBLE TIER
STARTER w/
ADDER [8-DOOR]
Basic Components:
1. Top Panel
2. Door
3. End Panel
4. Horizontal Frame
5. Vertical Frame
6. Partition
7. Door Braces
HORIZONTAL
FRAME
Lockers may be located individually, joined side by side, top and bottom, or both to create
banks of parking. The Lockers may be accessible by one or two doors.
VERTICAL
FRAME
PARTITIONS
Leveling Plates
Supplemental Components:
(shown in appendix)
1. Left, Right, Center Riser Blocks
2. Door Sill Plates
3. Horizontal Frame Filler(s)
Riser Blocks
Door Braces
ProPark Series {Upper} Tier Installation Guide
Page 5 of 13