CycleOps 100 PRO, User Manual

Page: 3 / 90

2
CHAPTER 2: UNPACKING THE CYCLEOPS PRO SERIES INDOOR CYCLE
Place the box upright and cut the plastic binding straps. Lift the top of the box to expose the indoor cycle and packaging.
Remove all parts from the box including foam inserts. Ensure all the following parts are included:
Name Quantity
A Rear stabilizer 1
B Front stabilizer 1
C Main frame assembly 1
D Handlebar post (shorter, reads to 18”) 1
E Seat post (longer, reads to 23”) 1
F Seat 1
G Seat post clamp 1
H Handlebar 1
I Water bottle holder 1
J Pedal set 1
K End caps 2
L End cap screws 4
M Water bottle spacer 1
N Large L handles 2
O Small L handles 2
P Stabilizer bolts 8
Q Stabilizer washers 8
R Multi-purpose wrench 1
S 6mm Allen wrench w/Phillips screw-
driver end 1
T 5mm Allen wrench 1
U 4mm Allen wrench 1
V 3mm Allen wrench 1
A B C
D E
F
G
H I
J
M
Additional tools that may be helpful:
-Vice Grips or small clamping tool
-17mm Cone wrench
-15mm box wrench
-10mm box wrench
-Pliers
-Pedal wrench
-2.5mm Allen wrench
Rear stabilizer
Front stabilizer
Main frame assembly
Seat post
Seat post
clamp
Water bottle
holder
Handlebar
Seat
Pedal set
Water bottle
spacer
Handlebar
post
Small L Handles
Large L Handles
18” 23”
O
P
Stabilizer bolts
Stabilizer washers
Q R
T
Multi-purpose
wrench
U
V
End caps
K
L
End cap screws
S
N
5mm Allen wrench
3mm Allen wrench
4mm Allen wrench
6mm Allen wrench w/
Phillips screwdriver end