TECH
TECH
TECH
Cycle Sounds
Staff Report – Photos by Mark Chryst
2” Bulle
t Sound System
2” Bullet Sound System
If you’re in the market for a sound system but are not ready to spend a pocket load of cash, the Cycle Sounds 2”
Bullet Sound System may be just what you’re looking for. The bullet style speakers mount directly on the handlebars
so no fairing is required. The speakers are water resistant and meet UV ASTM standard D4329. This means your
speakers will perform under all riding conditions. This speaker system requires an MP3 player such as an iPod. The
kit installed here includes two bullet style speakers, a high power micro amplifi er with mount and wiring harness,
and all of the needed connectors and wiring. It’s easy to install and looks good at the same time.
Shown here is the Cycle Sounds 2” Bullet Sound System.
This kit includes everything you need to rock out while
you ride.
This Harley-Davidson® Heritage Softail will receive the
Cycle Sounds 2” Bullet Sound System.
With the battery exposed, disconnect
the negative battery cable.
Remove the saddle.
4
First, loosen the passenger seat
retention bolt.
1
5
Next, pull the passenger pad away
from the fender.
2
Remove the windshield.
6
Pop the hardware loose that holds
the rider’s seat in place.
3
76 - April 2009 -
AmericanCycleMag.com
American Cycle Magazine
