background image

 

2

GENERAL SAFETY PRECAUTIONS 

 

WARNING! 

MOVING PART HAZARDS 
To prevent serious injury and property damage: 

 

Do not operate or install this product without reading and understanding these 
instructions.  

 

Keeps hands clear of nylon straps during operation.  

 

Inspect lift motor installation and nylon strap condition before operating winch. 

 

Do not use as a hoist.  

 

Do not use to move people. 

 

Never handle nylon straps or strap connections while in tension. 

 

Prior to initiating lift operation be sure any element which can interfere with safe winching 
is removed. 

 

Do not disengage clutch if winch is under load or nylon strap is in tension.  

BATTERY HAZARDS 

 

Batteries contain gasses which are flammable. 

 

Wear eye protection and remove all metal jewelry when working with battery. 

 

Do not lean over battery while making connections.  

 

Failure to take proper precaution may result in fire or serious injury.  

CAUTION! 

TO AVOID INJURY AND PROPERTY DAMAGE:

 

 

Do not use lift to secure a load during transport. 

 

Do not submerge in water. 

 

Do not use to tow other vehicles. 

 

Do not use as a recovery device 

 

Route support straps so they do not interfere with any plastic body parts 

Safety First! 

When installing your electric lift system, read and follow all mounting and safety instructions.  
Always use caution when working with electricity and remember to verify that no exposed 
electrical connections exist before energizing your winch circuit. 

 
PowerMax Electric Lift Specifications: 

1)  Rated Line Pull: 500lbs. (25 Amp Draw) 
2)  Motor: 12V DC , 0.4hp (310w) permanent magnet 
3)  Control: Handlebar mounted Mini-rocker switch 
4) Geartrain: 3-Stage Planetary 
5) Brake: patent-pending disc brake 
6)  Recommended Battery: 12 Volt, 12 Amp-hour minimum 
7)  Battery Leads:10 gauge 

 

To install the complete kit, you will need to mount the winch to the plow (or other 

compatible product), the rocker switch to the handlebar and wiring harness to the vehicle.  
Mounting locations may vary depending on make and model of the vehicle.  Read and 
understand the following instructions to choose the appropriate mounting locations. 

 

 

The Cycle Country PowerMax Electric Lift can be installed on most Cycle Country plow 

systems and use electric power from the vehicles battery to raise and lower the plow. A 
handlebar mounted switch allows the operator to easily operate the lift from the driver’s seat. 
A built-in safety feature prevents the electric lift from being operated unless the vehicles 
ignition switch is turned on.  

Summary of Contents for POWERMAX 15-0060










Reviews: