THIS WINCH MOUNTING KIT CAN BE USED TO MOUNT EITHER A
CYCLE COUNTRY 1500/2500 WINCH OR A WARN 1.5/15RT-XT/25RT-
XT/30RT-XT WINCH TO YOUR ATV.
All directions referring to right and left are when the rider is sitting on the machine. Please Note:
The roller hawse, cable clamp, cable stop, and hardware are included with the winch.
MODEL NUMBER 25-4210
WINCH MOUNT INSTALLATION INSTRUCTIONS
1.
Remove the front plastic shroud from the ATV.
2.
Insert the winch mount (Item 1) through the front opening of the bumper.
3.
Align the holes on the side of the winch mount to the mounting holes on the bumper tubing
tab and install bolts, flatwashers and lock nuts as shown on the parts page.
4.
Place the U-bolts around the frame tubing and through the holes in the winch mount plate and
attach the flatwashers and lock nuts.
Tighten all hardware at this time.
5.
Go to instructions for your winch. Please note: if your winch includes a roller hawse
mounting plate, it will not be needed for this application.
Front of ATV
U-bolts around
frame tubing.
3
