Cyclades AlterPath OnBoard, Administrator'S Manual

Page: 253 / 460

Web Manager "Config" Menu Options 217
Configuring SNMP
T
To Configure SNMP for a Device
1. Log into the Web Manager as an administrative user.
2. Go to Config
→
SNMP
.
3. Click the “SNMP configure” button for the desired device under the
“Servers SNMP configuration” heading.
The “Device devicename SNMP settings” dialog appears.
4. To configure the devices SNMP settings, do the following steps.
a. Click “Edit” under the “Service Processor SNMP setting” heading.
The “Device devicename SNMP settings” dialog appears.
b. Enter the object identifier in the OID field.
c. Select a version from the SNMP version pull-down menu.
d. If either the v1 or v2c version is selected in Step c, enter a community
name in the “Community field.
e. If the v3 version is selected in Step c, do the following steps.
i. Enter the user name required for authentication in the “User
name” field.
ii. Select an authentication method from the “Auth method” pull-
down menu.
iii. Enter the authentication password in the “Auth pass” field.
iv. Select an encyrption method from the “Encryption” pull-down
menu.
Auth pass
Password used for authentication
Encryption
• DES
• AES
Crypt pass
Password used for encryption
Table 6-14: Fields for Configuring SNMP (Continued)
Field or Menu
Name
Description