Configuring PCMCIA Cards
140
AlterPath OnBoard Administrator’s Guide
See the
AlterPath OnBoard Installation Guide
for a list of supported cards.
Also check the release notes at the Cyclades website for additions to the list of
supported cards.
As shown in Figure 5-19, three buttons appear under the Action column in the
PCMCIA table. The following table shows how the buttons are used and
provides links to related procedures.
Inserting a PCMCIA Card
Clicking an “Insert” button on an entry for a PCMCIA card slot brings up a
dialog like the one shown in the following figure.
Figure 5-20:
Insert PCMCIA Query
After the card is inserted, clicking “YES” in the dialog causes information to
appear in the “Card Type” column, as shown in the following figure.
Table 5-3:
PCMCIA Action Buttons
Action
Notes
Where Described
Insert
Click this button before
physically inserting the card.
“Inserting a PCMCIA Card” on page 140
Eject
Click this button before
physically ejecting the card.
“Ejecting a PCMCIA Card” on page 141
Configure
Click this button to bring up a
dialog for configuring the card
according to its type
Summary of Contents for AlterPath OnBoard
