CyberResearch CPBF PMX-233, User Manual

Page: 12 / 59

8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware of
CPBF PMX-233 . P lease follow sections 1.3, 2.1 and 2.2 in unpacking
the card . Then f ollow the jumpers switch setting, the watchdog, and
the DiskOnChip a ddress sections, etc.
2.1 Caution of Static Electricity
The CPBF PMX-233 has been well package with an anti-static bag in
protect its sensitive computer components and circuitry from the damage
of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against the
static electric discharge whenever you handle the board:
1. Please use a grounding wrist strap whenever handl ing the CPBF PMX-233.
Firmly clip the strap's alligator clip t o the end of the shielded wire lead
from a grounded object. Please put on and connect the strap before
handle the CPBF PMX-233 for harmlessly discharging any static electricity
through the strap.
2. Please put any components, parts or tools on an anti-static pad whenever
you work on them outside the computer. You may also use the anti-static
bag instead the pad. Please contact your local supplier for necessary
anti-static equipment .