CyberPower UR500 Instructions Manual Download Page 7

Page: 7 / 7

UR500/ UR700

Guaranteed Uninterruptible Power System

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection
against harmful interference in residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.  If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures: (1) Reori-
ent or relocate the receiving antenna.  (2) Increase the separation between the equipment and re-
ceiver.  (3) Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.   (4) Consult the dealer or an experienced radio/TV technician for help.   Any special
accessories needed for compliance must be specified in the instruction.

CAUTION:

A shielded-type power cord is required in order to meet FCC emission limits and also to

prevent interference to the nearby radio and television reception. It is essential that only the supplied
power cord be used. Use only shielded cables to connect I/O devices to this equipment.

CAUTION:

Any changes or modifications not expressly approved by the guarantee of this device

could void the user’s authority to operate the equipment.

For more information, contact us at:

CyberPower Systems (USA), Inc.

5555 12

Avenue East, Suite 110

Shakopee, MN55379

Tel: (952) 403-9500

Fax: (952) 403-9500

Email:

[email protected]