Copyright © 2016 Cyber Power Systems, Inc. All rights reserved.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower 8-Outlet Surge
Protector. The information contained in this manual
explains the features and operation of the product.
Please take a few moments to read this manual.
FEATURES
1. ON/OFF Switch
Controls power to all outlets.
2. Circuit Breaker Switch
To provide output overload and fault protection. It is a
10A breaker. When an overload occurs, it will
shut-down automatically. To resume operation, ensure
the overload condition is removed and reset the surge
protector by switching the unit Reset.
3. Grounded LED Indicator
Illuminated when a properly grounded AC outlet is
detected.
4. Protected LED Indicator
Illuminated when the surge protection feature is
working properly.
5. Standard Spaced Outlets (8)
6. USB Charging Ports*
Connect and charge up to two (2) USB devices using
the surge protected USB powering ports.
*USB outlets cannot be used as a USB hub. This device
does not transfer data
SPECIFICATIONS
• Part Number:
CPSURGE08USB-ANZ
• Model Number:
P0821UA1-AU
• Outlets:
8 Standard Spaced Outlets
• Electrical
Rating: 240V/10A/50Hz/2400W
• USB Charger Rating:
5V/2.4A total
• Surge Protection:
2750 Joules
L-N: 1550 Joules, L-E: 600 Joules, N-E: 600 Joules
• Maximum Spike Current:
67,500A
• 3 AC Lines Protected:
L-N: 37,500A, L-E: 15,000A, N-E:
15,000A; (The maximum surge possible on household
wiring is 6,000 volts)
• Maximum Spike Voltage:
6000V
• Response Time:
Less than 1 nanosecond
• Circuit Breaker:
Resettable 10 Amp
• EMI/RFI Filtration:
150 kHz to 100 MHz
• Attenuation:
up to 32dB
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
- Use only
in dry locations and only indoors.
DO NOT
plug into
another re-locatable power strip.
DO NOT
“daisy chain”
surge protectors.
DO NOT
replace the supply cord. If the
cord is damaged, the equipment should be scrapped.
DO
NOT
use with any aquarium equipment.
DO NOT
use if
properly grounded outlets are not available. This device
features an internal protection that will disconnect the
surge protective component at the end of its useful life,
but will maintain power to the load – now unprotected.
TROUBLESHOOTING
If the load of surge protector is over 10 Amp, the Circuit
Breaker Switch may have tripped. Please examine your
connected equipment and remove the device that is
overloading the circuit. Then, push the
Button of Circuit
Breaker Switch
, reset the circuit breaker.
If the
Grounded
indicator does not light when you plug in
the surge protector, move the surge protector to a
different grounded three-prong AC outlet. If it still does
not light, return the product to the dealer for assistance.
If the surge protector proves to be working properly, your
outlets may not be properly grounded and need to be
repaired by a professional electrician.
If the
Grounded
indicator turns off after a period of use,
the surge protection has been depleted. Replace your
surge protector.
If the
Protected
indicator does not light, the surge
protector’s AC line is no longer protected from surges.
Replace the surge protector. The surge protector may
have received a power
surge or spike beyond its specified limits that might
overload the protection circuitry and make it inactive.
The surge protector absorbed enough of the surge to
protect your connected equipment, but it will not protect
against future surges and spikes.
Protected
Grounded
U
S
B
C
ha
rg
er
2
.4
A
USER’S MANUAL
8-Outlet Surge Protector
P0821UA1-AU
8-Outlet Surge Protector
P0821UA1-AU
1
3
4
5
6
5
2
1
2