Copyright © 2017 Cyber Power Systems, Inc.
HARDWARE INSTALLATION
5
VERTICAL/TOWER INSTALLATION
Step 1: Adhere the rubber feet on the bottom side of base stands
Adhere the protective rubber feet on the bottom side of base stands
(rackmount ears) and UPS.
Step 2: Attach the base stands and attach the dust covers
Tighten the screws (M5X12*4pcs) of the base stands (rackmount ears)
onto the bottom of the UPS. Insert dust covers into the screw holes that
are not being used.
Step 3: Rotate the Multifunction LCD Module
Unscrew the upper panel of the UPS. Separate the upper panel from the
UPS. Gently lift the LCD module out. Rotate it to the tower orientation.
Reinstall it for a tower configuration.
ELECTRICAL INSTALLATION
After completing the hardware installation of the UPS, you are now ready
to plug in the UPS and connect your equipment.
SAFETY PRECAUTIONS
CAUTION!
Installation environment should be in a temperature and humidity controlled indoor area free of conductive contaminants. Do not install this UPS
where excessive moisture or heat is present (Please see specifications for acceptable temperature and humidity range).
CAUTION!
Never install a UPS, or associated wiring or equipment, during a lightning storm.
CAUTION!
Do not work alone under hazardous conditions.
CAUTION!
In case of the risk of electric shock, do not remove the top cover.
CAUTION!
The battery can energize hazardous live parts inside even when the AC input power is disconnected.
