LIMITED WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before
using the CyberPower HT1206TCU (the “CPS Product”).
By using the CPS Product, you consent to be bound by
the terms and conditions of this Limited Warranty and
Connected Equipment Guarantee (together referred to as
this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS
AND CONDITIONS OF THIS WARRANTY, YOU SHOULD
RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO
USING IT.
Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”)
provides this Limited Warranty. It only covers the original
purchaser and ends if you no longer own the CPS Product.
This warranty covers defects in materials and
workmanship in the CPS Product under normal use and
conditions. It also covers equipment connected to the CPS
Product and damaged because of the failure of the CPS
Product. This warranty covers the CPS Product and
connected equipment for as long as you own the CPS
Product.
How Do You Open A Connected Equipment Claim?
1. Call us at (877) 297-6937 or write to us at Cyber Power
Systems (USA), Inc., 4241 12th Ave. E., STE 400,
Shakopee, MN 55379, or send us an e-mail message at
[email protected] for instructions, within 10 days of
the occurrence.
2. When you contact CyberPower, identify the Product,
the Purchase Date, and the item(s) of Connected
Equipment. Have information on all applicable
insurance or other resources of recovery/payment that
are available to the Initial Customer and Request a
Claim Number.
3. You must provide a dated purchase receipt (or other
proof of the original purchase) for the CyberPower unit
and connected equipment. You also need to provide a
description of the damage to your connected
equipment.
4. Pack and ship the product to CyberPower and, if
requested, the item(s) of Connected Equipment, a
repair cost estimate for the damage to the Connected
Equipment, and all claim forms that CyberPower
provides to you. Show the Claim Number on the
shipping label or include it with the product. You must
prepay all shipping costs, you are responsible for
packaging and shipment, and you must pay the cost of
the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the CPS Product. If
the CPS Product is defective in material or workmanship,
CyberPower will repair or replace it at CyberPower’s
expense, or CyberPower will refund the full purchase price
you paid for the CPS Product (purchase receipt
showing price paid is required). If the CPS Product failed
to protect any equipment plugged into it, we will also
send you forms for making your claim for the connected
equipment. We will repair or replace the equipment that
was damaged because of the failure of the CPS Product
or pay you the
fair market value (NOT REPLACEMENT
COST)
of the equipment at of the time of the damage.
We will use Orion Blue Book, another a third-party
valuation guide, eBay, craigslist, or other source to
establish that amount. Our maximum liability is limited to
$350,000 for the HT1206TCU.
Who pays for shipping?
We pay when we send items to you; you pay when you
send items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY
SOFTWARE THAT WAS DAMAGED OR NEEDS TO BE
REPLACED DUE TO THE FAILURE OF THE CPS
PRODUCT OR ANY DATA THAT IS LOST AS A RESULT
OF THE FAILURE OR THE RESTORATION OF DATA
OR RECORDS, OR THE REINSTALLATION OF
SOFTWARE.
2. This Warranty does not cover: misuse, modification,
operation or storage outside environmental limits of
the CPS Product or the equipment connected to it, or
for damage while in transit or in storage, nor if there
has been improper operation or maintenance, or use
with items not designed or intended for use with the
CPS Product, such as laser printers, appliances,
aquariums, medical or life support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the Initial Customer
are those provided by this Warranty.
1. This Warranty does not apply unless the CPS Product
and the connected equipment were connected to
properly wired and grounded outlets (including
compliance with electrical and safety codes of the
most current electrical code), without the use of any
adapters or other connectors.
2. The CPS Product must have been plugged directly into
the power source and the equipment connected to the
CPS Product must be directly connected in the CPS
Product, not “daisy-chained” together in serial fashion
with any extension cords, another Product or device
similar to the CPS Product, surge suppressor, or power
tap. Any such installation voids the Warranty.
3. The CPS Product and connected equipment must have
been used properly in a suitable and proper
environment, in conformance with any applicable
license, instruction manual, or warnings.
4. The CPS Product must have been used at all times
within the limitations on the CPS Product’s VA
capacity.
This device is manufactured using environmentally-safe
procedures in compliance with the Restriction of
Hazardous Substances (RoHS) directive.
Please join CyberPower in caring for the
environment by recycling this manual.
3
4
Where can I get more information?
Contact CyberPower at 4241 12th Ave E., STE 400,
Shakopee, MN 55379; call us at (877) 297-6937; or send us
an e-mail message at [email protected].
PRODUCT REGISTRATION
Prompt product registration assures coverage under the
Limited Warranty, and also allows the opportunity to be
notified of product enhancements, upgrades, and other
announcements.
Registration is quick and easy. Go to Product Registration
page at www.cyberpower.com.
CONTACT INFORMATION
Cyber Power Systems, Inc. 4241 12th Avenue East Suite
400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPower.com
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, And
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment. This Class B digital apparatus complies with
Canadian ICES-003.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Cyber Power Systems, Inc.
www.cyberpower.com
K01-0000618-00