Specifications
•
Model Number:
HT1108TNCGRU1
•
Outlets:
11 – 6 Transformer Spaced
•
Surge Protection:
4650 Joules
•
Communication Protection:
Combo RJ11/ RJ-45
1 in / 1 out
•
Coaxial Protection:
1 Pair
•
Electrical Rating:
125V/15A/1875W
•
Maximum Peak Current:
225,000A
•
UL Clamping Voltage:
UL 1449 3
rd
/400V (L-N),
500V (L-G, N-G)
•
EMI/RFI Filtration:
150 kHz to 100 MHz, up to 70dB
Troubleshooting
I
f the
ON/OFF
is switched off, the 15 AMP circuit breaker
may have tripped. Examine your connected equipment and
remove the device that is overloading the circuit. Then, the
ON/OFF
switch back to
RESET.
If the
Grounded
indicator does not light when you plug in
the surge protector, Move the surge protector to a different
grounded three-prong AC outlet. If it still does not light,
return the product to the dealer for assistance. If the surge
protector proves to be working properly, your outlets may
not be properly grounded and need to be repaired by a
professional electrician.
If the
Grounded
indicator turns off after a period of use, the
surge protection has been depleted. Replace your surge
protector.
If the
Protected
indicator does not light, the surge
protectors AC line is no longer protected from surges.
Replace the surge protector. The surge protector may have
received a power surge or spike beyond its specified limits
that might overload the protection circuitry and make it
inactive. The surge protector absorbed enough of the surge
to protect your connected equipment, but it will not protect
against future surges and spikes.
If the
Master-controlled
outlets don’t turn on or off when
your notebook computer or TV is connected to the
Master
outlet:
• The power consumption of
Master
outlet must be below
10 Watts for the
Master-controlled
outlets to turn off.
Some computers continue to consume more than 10 Watts
of power during battery charging or in standby mode. In
this case, please make sure Hibernate/ Sleep mode is also
enabled on your computer under power management
settings, or check with your computer’s manufacturer.
• The power consumption of
Master
outlet must be above
50 Watts to trigger the
Master-controlled
outlets to turn
on. Some computers and TV do not draw enough power to
turn on the
Master-controlled
outlets. In this case, please
try plugging a different primary device into the
Master
outlet.
Product Registration
Thank you for purchasing a CyberPower product. Prompt
product registration entitles coverage under the Limited
Warranty, and also allows the opportunity to be notified of
product enhancements, upgrades, and other announcements.
Registration is quick and easy at www.cpsww.com/register.
Need Additional Help?
Feel free to contact our Tech Support department with installation,
troubleshooting, or general product questions.
CyberPower Technical Support
Phone: 1-877-297-6937
Email: [email protected]
Web: www.CPSww.com
Mail: 4241 12th Avenue E, Suite 400 Shakopee, MN 55379
Hours of Operation: Monday – Friday, 8:00am – 5:00pm Central
Limited Warranty
Read the following terms and conditions carefully before using the
CyberPower HT1108TNCGRU1(the “Product”). By using the
Product you consent to be bound by and become a party to
the terms and conditions of this Limited Warranty (together
referred to as this “Warranty”). If you do not agree to the terms
and conditions of this Warranty, you should return the Product
for a full refund prior to using it.
Who Is Providing This Warranty?
CyberPower Systems (USA), Inc. (“CyberPower”) provides this
Limited Warranty.
What Does This Warranty Cover?
This warranty covers defects in materials and workmanship in the
Product under normal use and conditions.
What Is The Period Of Coverage?
This Warranty is for as long as the original owner owns the Product.
Who Is Covered?
This warranty only covers the original purchaser.
Coverage ends if you sell or otherwise transfer the Product.
How Do You Get Service?
1
Call us at (877) 297-6937 or write to us at Cyber Power
Systems (USA), Inc., 4241 12th Ave. E., STE 400,
Shakopee, MN 55379 or send us an e-mail message at
[email protected] for instructions.
2
When you contact CyberPower, identify the Product, the
Purchase Date, and the item(s) of Connected Equipment.
Have information on all applicable insurance or other
resources of recovery/payment that are available to the Initial
Customer and Request a Claim Number.
3 You must provide a purchase receipt (or other proof of the
original purchase) and provide a description of the defect.
CyberPower Systems (USA), Inc
4241 12th Ave. East, Suite 400
Shakopee, MN 55379
Phone: 952-403-9500
CPSww.com
© 2011 CyberPower Systems (USA), Inc.
All rights reserved. All other trademarks are
the property of their respective owners.
K09-1101011-00
4 Pack and ship the product to CyberPower and, if requested,
the item(s) of Connected Equipment, a repair cost estimate
for the damage to the Connected Equipment, and all claim
forms that CyberPower provides to you. Show the Claim
Number on the shipping label or include it with the product.
You must prepay all shipping costs, you are responsible for
packaging and shipment, and you must pay the cost of the
repair estimate.
What Will We Do To Correct Problems?
CyberPower will inspect and examine the Product.
If the Product is defective in material or workmanship,
CyberPower will repair or replace it at CyberPower's expense,
or, if CyberPower is unable to or decides not to repair or replace
the Product (if defective) within a reasonable time,
CyberPower will refund to you the full purchase price you paid
for the Product (purchase receipt showing price paid is required).
Who Pays For Shipping?
We pay when we send items to you; you pay when you send
items to us.
What Are Some Things This Warranty
Does Not Cover?
1
This Warranty does not cover any software that was damaged or
needs to be replaced due to the failure of the Product or any
data that is lost as a result of the failure or the restoration of
data or records, or the reinstallation of software.
2
This Warranty does not cover or apply to: misuse, modification,
operation or storage outside environmental limits of the
Product or the equipment connected to it, nor for dam age
while in transit or in storage, nor if there has been improper
operation or maintenance, or use with items not designed or
intended for use with the Product, such as laser printers,
appliances, aquariums, medical or life support devices, etc.
What Are The Limitations?
1
This Warranty does not apply unless the Product and the
equipment that was connected to it were connected to properly
wired and grounded outlets (including compliance with electrical
and safety codes of the most current electrical code),
without the use of any adapters or other connectors.
2
The Product must have been plugged directly into the power
source and the equipment connected to the Product must be
directly connected to the Product and not “daisy-chained”
together in serial fashion with any extension cords, another
Product or device similar to the Product, surge suppressor,
or power tap. Any such installation voids the Limited Warranty.
3 The Product and equipment connected to it must have been
used properly in a suitable and proper environment and in
conformance with any license, instruction manual, or warnings
provided with the Product and the equipment connected to it.
4 The Product must have been used at all times within the
limitations on the Product's VA capacity.
5 The sole and exclusive remedies of the Initial Customer are
those provided by this Warranty.
Contact Information
CyberPower Systems, Inc.
4241 12th Ave. East Suite 400
Shakopee, MN 55379
Phone: (952) 403-9500
Toll-free: (877) 297-6937
CyberPower is the warrantor under this Limited Warranty.
You may also contact CyberPower on the web at
CPSww.com
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation. Changes
or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. This Class B digital apparatus
complies with Canadian ICES-003. Note: These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
