CyberPower CPS1000E-FR, User Manual

Page: 8 / 56

8
DEFINITIONS FOR ILLUMINATED LCD INDICATORS
The LCD Display indicates a variety of EPS operational
conditions. All descriptions apply when the EPS is plugged
into an AC outlet and turned on or when the EPS is on
battery.
1. INPUT VOLTAGE Meter: This meter measures the AC voltage that the EPS is receiving from the
utility wall outlet. The EPS is designed, through the use of automatic voltage regulation, to
continuously supply connected equipment with stable,
230 output voltage . In the event of a
complete power loss, severe brownout or over-voltage the EPS will rely on its external battery t o
supply consistent 230 output voltage. The Input Voltage Meter can be used as a diagnostic tool to
identify poor quality input power.
2. OUTPUT VOLTAGE Meter: This meter measures, the AC voltage that the EPS is providing to the
computer. It displays normal line mode, AVR mode, and battery backup mode.
3. NORMAL MODE Icon: This icon will illuminate when the EPS is working under normal conditions.
4. ON BAT (On Battery) Icon: When a severe brownout or blackout, this icon appearing and an
alarm (two short beeps) activated indicate that the EPS is working via its batteries . Once the
batteries are running out of power, for a period of time, an alarm (two short beeps) will appear
continuously. If this occurs, it is recommended that save your files and turn off your equipment
manually as soon as possible.
5. SILENT MODE Icon: This icon appearing indicates that the buzzer does not beep in the silent
mode until the low battery capacity.
6. OVER LOAD Icon: This icon appearing and an alarm activated indicate that the overload
condition. To relieve the overload, unplug your equipment from the EPS outlets until the icon
disappears and the alarm stops being activated.
7. LOAD CAPACITY: Load CAPACITY is also shown on the bar chart; equal 25% load capacity for
each segment.
8. BATTERY VOLTAGE: BATT. VOLTAGE indicates the voltage of battery.
EPS STATUS INQUIRY AND FUNCTIONS SETUP
GENERAL MODE
a. Press the
“Display” button to check the status of the EPS
Items Unit
Input Voltage V
Output Voltage V
Load Capacity %
Battery Voltage V